X-ray diagnostic complex for 2 workstations Calypso F (MTObs) with CR system for digital conversion of X-rays

X-ray machine for 2 workplaces Calypso F (MTObs) made of CR by digital transformation of X-ray images

Equipment:

- X-ray table MTObs with fixed height and table deck "floating" in 4 directions,

- high-frequency X-ray generator 50 kW,

- X-ray tube,

- X-ray vertical stand against the wall,

- high voltage cables,

- CR system for digital transformation of X-ray images (CR digital converter, laboratory assistant workstation with software, CR-cassettes 35x43 - 2 pcs, 24x30 - 2 pcs),

- additional workstation for a radiologist with specialized software,

- DS5302 medical digital dry print thermal printer.

DESCRIPTION:

CALYPSO F is an innovative multifunctional X-ray diagnostic system that is the most flexible solution in direct digital radiography. A highly integrated system that provides high-quality diagnostic results for trauma, emergency, routine and specialized examinations.

CALYPSO F is equipped with the OPERA D4000DR digital system, which provides high image quality and reduced patient dose.
This innovative DR system is offered in a variety of configurations, with a variety of generators and flat panel detectors, to meet any need - from emergency to trauma.

Main areas of application

• Emergency medicine
• General examinations
• Chest examination
• Diagnostics of bones and joints

SPECIFICATIONS:

• The size of the tabletop is 220 x 80 cm.

• X-ray table MTOps Fixed Height

• Distance floor - surface 76 cm.

• Maximum patient weight 150 kg.

• Distance between table surface - film - 70 mm.

• The format of the cassettes used: 13x18 to 35x43.

• Vidsyucha grille 90 lines / inch, ratio 12: 1, focus 100 cm.

• Column: longitudinal movement 165 cm.

• Column: height 236 cm.

• Floor rail length 220cm

• Rotation release - foot pedal

• Focus-floor distance 53 - 193 cm.

• Rotation of the X-ray tube +/- 180 deg.

• Turn
  
  High frequency 400kHz X-ray generator for radiography 50 kW.

• Operating voltage range 40 - 150

• The operating range of mA is from 10 to 630 mA.

• The range of operating values ​​mAs is from 0.1 to 630 mAs.

• APR-anatomical programming of exposure parameters (768 programs).

• Exposure time: from 1 sec to 6.3 sec.

• Power supply: three-phase current 380/480 VAC +/- 10%, 50/60 Hz.

• Anode rotation speed 3000 / min.

• Extensive self-test.
  
  Vertical stand of pictures.

• The sizes of the cassettes used are up to 35 x 43.

• Vidsiucha grille 90 lines / inch, ratio 12: 1, focus 180 cm.

• The range of vertical travel is 1490 mm.

• X-ray tube with rotating bifocal anode, focal spot 0.6 / 1.2 mm, maximum voltage 150 kV.
  Country of origin Italy