Digital X-ray diagnostic complex for 2 workstations Calypso F (MTObs) with a wireless flat panel detector 35x43 cm, a workstation for receiving, storing and processing digital X-ray images

Digital X-ray machine for 2 workplaces Calypso F (MTObs) with a wireless flat-panel detector 35x43 cm, a workstation for obtaining, storing and processing digital X-ray images.

Equipment:

- X-ray table MTObs with fixed height and table deck "floating" in 4 directions,

- high-frequency X-ray generator 50 kW,

- X-ray tube,

- X-ray vertical stand against the wall,

- high voltage cables,

- FPD 35x43 DR digital flat panel Wi - Fi detector,

- laboratory assistant workstation with software, - additional workstation of a radiologist with russified software,

- DS5302 medical digital dry print thermal printer.

DESCRIPTION:

CALYPSO F is an innovative multifunctional X-ray diagnostic system that is the most flexible solution in direct digital radiography. A highly integrated system that provides high-quality diagnostic results for trauma, emergency, routine and specialized examinations.

CALYPSO F is equipped with the OPERA D4000DR digital system, which provides high image quality and reduced patient dose.
This innovative DR system is offered in a variety of configurations, with a variety of generators and flat panel detectors, to meet any need - from emergency to trauma.

Main areas of application

• Emergency medicine
• General examinations
• Chest examination
• Diagnostics of bones and joints

SPECIFICATIONS:

• The size of the tabletop is 220 x 80 cm.
• X-ray table MTOps Fixed Height
• Distance floor - surface 76 cm.
• Maximum patient weight 150 kg.
• Distance between table surface - film - 70 mm.
• The format of the cassettes used: 13x18 to 35x43.
• Vidsyucha grille 90 lines / inch, ratio 12: 1, focus 100 cm.
• Column: longitudinal movement 165 cm.
• Column: height 236 cm.
• Floor rail length 220cm
• Rotation release - foot pedal
• Focus-floor distance 53 - 193 cm.
• Rotation of the X-ray tube +/- 180 deg.
• Turn
  
  High frequency 400kHz X-ray generator for radiography 50 kW.
• Operating voltage range 40 - 150
• The operating range of mA is from 10 to 630 mA.
• The range of operating values ​​mAs is from 0.1 to 630 mAs.
• APR-anatomical programming of exposure parameters (768 programs).
• Exposure time: from 1 sec to 6.3 sec.
• Power supply: three-phase current 380/480 VAC +/- 10%, 50/60 Hz.
• Anode rotation speed 3000 / min.
• Extensive self-test.
  
  Vertical stand of pictures.
• The sizes of the cassettes used are up to 35 x 43.
• Vidsiucha grille 90 lines / inch, ratio 12: 1, focus 180 cm.
• The range of vertical travel is 1490 mm.
• X-ray tube with rotating bifocal anode, focal spot 0.6 / 1.2 mm, maximum voltage 150 kV.

Country of origin Italy